22REPERFORMANCE.COM
40 Rash Lane Chico, CA 95973
530.892.1451
These videos below are the questions we get asked the most when customers install their own engines (and a lot of install shops, too). There are plenty of ways to install an engine and set up the tuning the right way. We’d like to show you some of the tricks about installation and tuning we have learned from the installer that we recommend. We build the best engines available, we also want to help you make it run at it’s best. We DO NOT mind answering questions about installations, the only thing we mind is when questions ARE NOT ASKED!
Installing the distributor to #1 TDC onto your rebuilt long blockhttp://youtu.be/9qEQMzHZtMohttp://www.youtube.com/watch?v=RVKb4fedgxUshapeimage_4_link_0
SETTING THE TIMING IS CRUCIAL! Please don’t just “eyeball” it or call it “good enough”. 
A timing light and the right procedure to set it are CRUCIAL!
Stay tuned for the video on how to set the timing when the engine is running.....http://youtu.be/9qEQMzHZtMohttp://youtu.be/9qEQMzHZtMohttp://youtu.be/9qEQMzHZtMohttp://www.youtube.com/watch?v=RVKb4fedgxUshapeimage_5_link_0shapeimage_5_link_1shapeimage_5_link_2
Installing your rebuilt fuel injectors You are replacing your old, 20+ year old, 200,000 mile injectors...... right? 
It’s all about SLOWLY installing the injectors into the fuel rail and cylinder head to make sure you don’t bind up any of the seals. Take your time and get it right the first time. It’s no fun to do it a second time. Inspecting and installing the power steering idler/adjuster bearing They don’t always make noise when the engine is running! Check it and replace it. If it makes any noise when you spin it by hand, spins TOO easy by hand or has any tight spots in it, REPLACE IT!
Sequence for installing the alternator and power steering brackets
A little help with the sequence of the brain teaser that is the alternator / power steering brackets. 
There are 5 very short videos. check em’ out. Removing a 22RE engine Short video, not very detailed, but at least it shows you can do it on your own. 
Piece of cake..... right? I’m working on other videos right now, 
but take a look at our others we have on our channel. 
If there is something specific you’d like to see, let us know....
YOUR BEST SOURCE FOR TOYOTA 22RE / 22R REBUILT ENGINES, PERFORMANCE ENGINES, CYLINDER HEADS, PARTS AND CUSTOM RACING MACHINE WORK
Call us at 530.892.1451 or e-mail info@22reperformance.commailto:info@22reperformance.com?subject=mailto:info@22reperformance.com?subject=info,%20please...shapeimage_18_link_0
Check out our videos and subscribe to our channel. 
New videos are always being added (we are in the process of updating all of our videos to HI-DEF). Testing your 22RE EFI temp senders Since you are cleaning your intake the right way, now is the time to clean and test your EFI temp senders. 
Take the time and check these out, it will solve problems before you re-install your engine. REBUILT ENGINES NEW CYLINDER HEADS - PERFORMANCE & STOCK PERFORMANCE PARTS BUILD PROCESS INSTALLATION PARTS WARRANTY & CORE INFO SHIPPING INSTALL TIP VIDEOS REBUILT ENGINES NEW CYLINDER HEADS - PERFORMANCE & STOCK PERFORMANCE PARTS BUILD PROCESS INSTALL PARTS WARRANTY & CORE INFO INSTALL TIP VIDS ENGINE BUILD PARTS