YOUR SOURCE FOR TOYOTA 22RE PERFORMANCE ENGINES, CYLINDER HEADS, PARTS AND CUSTOM RACING MACHINE WORK Rebuilt Engines Performance Cylinder Heads 22RE Performance Parts
Call us at 530.892.1451 or e-mail info@22reperformance.commailto:info@22reperformance.com?subject=mailto:info@22reperformance.com?subject=info,%20please...shapeimage_8_link_0
22REPERFORMANCE.COM
40 Rash Lane Chico, CA 95973
530.892.1451
info@22reperformance.com
Check out our videos and subscribe to our channel. New videos are always being added. 22RE build process
Stage 1
1985-1995 Rebuilt 22RE / 22R long block
$1795.00 (exchange is required)
Better than stock performance, better than stock reliability.  
 
  1.  block is bored, torque plate honed and plateau finished
  2.  block surface is decked with NEW  timing cover installed
  3.  new O.E.M. rear main seal (updated OEM seal)
  4.  new freeze plug kit is installed
  5.  all threads are tap chased and cleaned
  6.  crankshaft is reground and micro-polished
  7.  connecting rod big and small ends are resized
  8.  NEW pistons, pins and pin bushings (sized to fit)
  9.  Perfect Circle chrome rings are gapped and installed
  10.  King Bearings (mains, rods and thrust) are installed
  11. ➡ NEW cylinder head casting
  12.  head is surfaced to proper RA finish
  13.  harder powdered metal exhaust seats are installed
  14.  all NEW valves are installed, installed height is set
  15.  intake valve seats get a 4 angle cut  
  16.  exhaust valve seats are fully radiused
  17.  springs are individually tested
  18.  reground OEM camshaft
  19.  NEW higher oiling capacity rocker shafts
  20.  remanufactured rocker arms and new adjuster screws    
  21.  Corteco head gasket
  22.  NEW cylinder head bolts
  23.  NEW Japanese OSK timing kit with HD metal guide rail
  24.  OEM front crankshaft seal
  25.  NEW OEM Aisin oil pump
  26.  valve cover interior baffle is removed, cover and baffle are           completely cleaned and resealed, valve cover is painted
  27.  thoroughly cleaned and painted oil pan is installed.
Engine is shipped with installation gaskets included.
Check out our build process page for more detailed info....
 
 
Stage 2
1985-1995 Rebuilt 22RE / 22R long block
$2295.00 (exchange is required)
Built to get the MOST performance from your stock fuel system. Idle remains smooth and power is available from 1,500 to 5,000 rpm.
 
NOW WITH DYNO TESTING RESULTS!
watch the video here
 
Includes everything from the Stage 1 and these power adding goodies:
 
  1.  Ferrea 45.5mm stainless steel intake valves
  2.  Ferrea 37.5mm stainless steel exhaust valves
  3.  Port, polish and blend work to intake and exhaust pockets
  4.  280 / 440 OEM reground performance cam (for EFI)
  5.  268 / 440 OEM reground performance cam (for carb)
  6.  Performance 70lb. valve springs  
 
Check out the build sheet and pictures of the cylinder head HERE
 
Stage 2.5
1985-1995 Rebuilt 22RE / 22R long block
$2795.00 (exchange is required)
*Fully balanced and blueprinted engine*
We build this engine for those looking for the longest lasting, best performing, smoothest running engine possible while still using your stock fuel system. Everything from the Stage 1 and Stage 2 engine is included, and these other items are added:
 
  1.  Connecting rods are individually balanced to within .5 gram
  2.  Crankshaft, rods, pistons and pins are balanced as an assembly              
  3.  ARP cylinder head studs are installed
  4.  ARP connecting rod bolts
  5.  timing chain kit includes BOTH metal guide rails
 
 
 
22RE / 22R engines custom built for those that know the difference. Each engine is hand built just for YOU.
Stage 3 - 5 engine specs and build sheet coming later this week!
More pictures, videos and Stage 3 - 5 engines coming. Check back soon!
Installation Kits